2 x Alaska Refrigerants 3in1 R134a Replacement Refrigerant with PAG 100 Oil and Sealer

Description

Package contents:

2 cans of 3in1 HC134a hydrocarbon refrigerant replacement gas. The package equals 2 × 500 g of R134a refrigerant and contains 2 × 185 g of gas.
(NOTE: charging hose not included in the package!)

Note: Do not use this product with R12 systems unless you are sure the system does not contain mineral oil.
No F-gas certification is required to order this replacement gas. The product requires a 1/acme-thread compatible hose for proper use.

Revive your vehicle’s air conditioning system — this innovative 3-in-1 solution combines the power of a highly effective hydrocarbon gas with premium PAG oil and a reliable sealing agent to refresh and maintain your vehicle’s A/C system.

Order our product now and refill the refrigerant in your car, van, motorhome, SUV, truck, or even agricultural vehicle in just a few minutes.
This refrigerant is compatible exclusively with R134a air conditioning systems.
Please note: the product must be used only with a suitable charging hose and connected only to the low-pressure port of the A/C system.

Our product is compatible with all vehicles manufactured between 1994 and 2016 that use R134a refrigerant.
• Contains natural, non-toxic, hydrocarbon-based gases that do not cause a greenhouse effect.
• A safe home-use refill kit – recharge your vehicle’s A/C system in less than 10 minutes.
• Avoid high service costs by using our product.
• Our refrigerant offers 2.7 times higher performance than conventional R134a, improving fuel efficiency and cooling power.
• One can of 3in1 HC134a Alaska Refrigerants equals 500 g of R134a refrigerant.
• Compatible with the following vehicle types: passenger cars, vans, motorhomes, SUVs, trucks, and agricultural vehicles.

HOW TO USE THE PRODUCT:
• Start the engine and set the A/C to the coldest setting, with the fan on maximum or automatic mode.
• Locate the vehicle’s low-pressure service port. Pull back the plastic ring, connect the hose to the port, then release the ring. You should hear a click when it connects.
• Turn the can upside down and slowly open the valve to let the contents enter the A/C system.
IMPORTANT! Monitor the pressure gauge constantly and stop the process when the correct pressure is reached.
• Once the can is empty or the desired pressure is reached, close the valve to seal the can. Turn off the vehicle’s engine and disconnect the hose.
• Restart the vehicle and check the cooling performance of the A/C system. Wait 10 minutes and recheck the pressure.