Alaska Refrigerants R1234yf Replacement Refrigerant for Vehicles
18 €
Contents of the package:
– 1 cylinder of HC1234yf Hydrocarbon air-conditioning gas. Equivalent to 375gr of R1234yf gas, the cylinder contains 185 gr of gas.
Ideally, all our packages will be delivered within 1-2 working days.
In stock
● Rendeljen biztonságos, gyors online fizetéssel rendszerünkön keresztül.
● A rendelést követő 48 órán belül átadjuk a csomagot a futárszolgálatnak.
● Amennyiben további kérdése merült fel a termékeink valamelyikével, ne habozzon kapcsolatba lépni ügyfélszolgálatunkkal.
Description
Package contents:
– 1 can of HC1234yf hydrocarbon-based refrigerant refill gas. Equivalent to 375 g of R1234yf-type refrigerant, the can contains 185 g of gas.
(IMPORTANT: The package does not include a charging hose!)
An affordable and eco-friendly air conditioning gas refill solution.
Order our product now and refill the refrigerant in your car, van, motorhome, SUV, truck, or even agricultural vehicle in just a few minutes.
This refrigerant is compatible only with R1234yf air conditioning systems – Please note that the product must be used with a proper charging hose and should be connected exclusively to the low-pressure port of the AC system.
Vehicles manufactured after 2012 (including passenger cars, agricultural machines, trucks, and vans) are mostly filled with R1234yf refrigerant, so our product is compatible with a wide range of vehicles.
• Contains natural, non-toxic, hydrocarbon-based gases that do not contribute to the greenhouse effect.
• Safe refill kit for home use – recharge your vehicle’s air conditioning system in less than 10 minutes.
• Avoid high service costs by purchasing our product.
• Our gas is more efficient than traditional R134a refrigerant, delivering 2.7 times the performance, which improves fuel economy and cooling efficiency.
• One can of HC1234yf Alaska Refrigerants equals 500 g of R1234yf refrigerant.
• Compatible vehicle types: cars, vans, motorhomes, SUVs, trucks, and agricultural vehicles.
HOW TO USE THE PRODUCT:
• Start the engine and set the air conditioning to the coldest setting, with the fan on maximum or automatic mode.
• Locate the low-pressure port on your vehicle’s AC system. Pull back the plastic ring, connect the hose to the port, then release the ring. You should hear a click when properly connected.
• Turn the can upside down, then slowly open the valve to allow the contents to enter the AC system.
IMPORTANT: Continuously monitor the pressure gauge and stop the process once the correct pressure is reached.
• When the can is empty or the desired pressure has been reached, close the valve to seal the can. Turn off the engine and disconnect the hose.
• Restart the vehicle and check the cooling performance of the AC system. Wait 10 minutes and measure the pressure again.
Additional information
| Weight | 300 kg |
|---|---|
| Dimensions | 8 × 11 × 24 cm |
