Alaska Refrigerants R134a Replacement Refrigerant for Vehicles + Leak Sealer + Hose and Gauge
50 €
Contents of the package:
– 1 cylinder HC134a Hydrocarbon air conditioning refill gas. Equivalent to 500gr of R134a gas, the cylinder contains 185 gr of gas.
– 1 bottle of refrigerant leak sealant. Equivalent to 270gr R134a gas, the cylinder contains 100 gr gas and 30ml sealant.
– 1 piece of R134a hose with gauge.
Ideally all our packages will be delivered within 1-2 working days.
In stock
● Rendeljen biztonságos, gyors online fizetéssel rendszerünkön keresztül.
● A rendelést követő 48 órán belül átadjuk a csomagot a futárszolgálatnak.
● Amennyiben további kérdése merült fel a termékeink valamelyikével, ne habozzon kapcsolatba lépni ügyfélszolgálatunkkal.
Description
Package contents:
1 bottle of A/C leak sealing compound, equivalent to 270 g of R134a refrigerant. Contains 100 g of propellant gas and 30 ml of sealing solution.
1 bottle of HC134a hydrocarbon-based refrigerant gas substitute, equivalent to 500 g of R134a. Contains 185 g of gas.
1 piece of R134a charging hose with pressure gauge.
IMPORTANT: FILLING MUST BE DONE IN TWO STEPS!
1.Step: Inject the leak sealer
2.Step: Fill the refrigerant gas
The Alaska Aircon leak sealer prevents refrigerant from escaping through worn or damaged O-rings. It seals and reinforces these areas, stopping leaks that would otherwise result in costly repair fees.
Leak sealers work by hermetically sealing gaps or surfaces, preventing fluids, gases, or contaminants from escaping or entering. This contributes to the efficiency, safety, and longevity of the A/C system.
With Alaska Refrigerants’ leak sealing solution, you can easily and safely fix minor leaks in your vehicle’s A/C system at home.
– A 100% environmentally friendly product.
This refrigerant is compatible only with R134a air conditioning systems.
Please note: This product must only be used with a compatible charging hose, and should be connected exclusively to the low-pressure port of the vehicle’s A/C system.
Compatible vehicles:
All vehicles manufactured between 1994 and 2016 that use R134a refrigerant.
• Contains natural, non-toxic, non-greenhouse-effect hydrocarbon gases
• Safe refill and sealing kit for home use – takes less than 10 minutes
• Avoid costly repair bills by fixing the issue yourself
• Our HC134a gas offers 2.7× higher efficiency than traditional R134a, improving fuel consumption and cooling performance
• Compatible with passenger cars, vans, motorhomes, SUVs, trucks, and agricultural vehicles
HOW TO USE THE PRODUCT:
• Start the engine and set the A/C to its coldest setting with the fan on maximum or automatic mode
• Locate the vehicle’s low-pressure service port. Pull back the plastic ring, connect the hose, and release it. You should hear a click
• Turn the bottle upside down and slowly open the valve to let the contents flow into the system
IMPORTANT: Continuously monitor the pressure gauge and stop filling once the proper pressure is reached
• When the bottle is empty or the correct pressure is reached, close the valve. Turn off the engine and disconnect the hose
• Restart the vehicle and test the cooling performance. Wait 10 minutes and check the pressure again
Additional information
| Weight | 770 kg |
|---|---|
| Dimensions | 11 × 15 × 24 cm |
