Alaska Refrigerants Leak Sealer Bottle R134a BLACK (for empty A/C systems only)

Description

Package contents:
– 1 bottle of air conditioning leak sealer with propellant gas. Contains 40 g of propellant and 30 ml of sealing compound.
– 1 bottle of HC134a hydrocarbon-based refrigerant gas substitute. This bottle contains 185 g of gas, equivalent to 1 × 500 g of R134a refrigerant.
(NOTE: Charging hose not included in the package!)

Important: This product is intended only for use in systems with zero pressure.
The leak sealer prevents refrigerant loss by sealing leaks in O-rings and other connection points. It helps avoid expensive repair costs by sealing microleaks and ensuring the integrity of the A/C system.

One of the most important properties of leak sealing compounds is their ability to hermetically seal surfaces and gaps, preventing liquids, gases, or other substances from escaping or entering the system. As a result, these products enhance the system’s efficiency, safety, and longevity.

With the Alaska Aircon leak sealer, you can easily and safely eliminate small leaks in your vehicle’s A/C system — all from home.

HOW TO USE THE PRODUCT:
• Start the engine and set the A/C to the coldest temperature with the fan at maximum or automatic speed.
• Locate your vehicle’s low-pressure service port. Pull back the plastic ring on the connector, attach the hose to the port, and release the ring. You should hear a click when it connects properly.
• Turn the bottle upside down and slowly open the valve to let the contents flow into the system.
IMPORTANT: Monitor the pressure gauge continuously and stop filling once the correct pressure is reached.
• Once the bottle is empty or the desired pressure is reached, close the valve. Turn off the engine and disconnect the hose.
• Restart the vehicle and check the cooling performance. Wait 10 minutes and check the pressure again.