Alaska Refrigerants Leak Sealer Bottle for R134a systems
26 €
Contents of the package:
– 1 bottle of refrigerant leak sealant. The cylinder contains 100 gr of gas and 30ml of sealant.
Ideally, all our packages will be delivered within 1-2 working days.
In stock
● Rendeljen biztonságos, gyors online fizetéssel rendszerünkön keresztül.
● A rendelést követő 48 órán belül átadjuk a csomagot a futárszolgálatnak.
● Amennyiben további kérdése merült fel a termékeink valamelyikével, ne habozzon kapcsolatba lépni ügyfélszolgálatunkkal.
Description
Package contents:
– 1 bottle of air conditioning leak sealing compound.
Equivalent to 270 g of R134a gas. The bottle contains 100 g of propellant gas and 30 ml of sealing fluid.
(NOTE: The package does not include a charging hose!)
The Alaska Aircon Leak Sealer prevents refrigerant from leaking through O-rings by sealing and reinforcing them, eliminating leaks that would otherwise result in costly repair bills.
The key benefit of leak sealing compounds is their ability to hermetically seal surfaces and micro-gaps, preventing fluids, gases, or contaminants from escaping or entering the system.
This helps enhance the efficiency, safety, and longevity of the air conditioning system.
With Alaska Refrigerants’ leak sealer, you can easily and safely fix small A/C system leaks at home.
– Detect and stop A/C leaks safely at home.
– The product is 100% environmentally friendly.
Compatibility:
Our product is compatible with all vehicles manufactured between 1994 and 2016 that use R134a refrigerant.
• Contains natural, non-toxic, non-greenhouse-effect hydrocarbon gases.
• Safe DIY solution – fix leaks in less than 10 minutes.
• Avoid high service costs with a quick, affordable alternative.
• Compatible with the following vehicle types: passenger cars, vans, RVs, SUVs, trucks, and agricultural vehicles.
HOW TO USE THE PRODUCT:
• Start the engine and set the A/C to the coldest setting with the fan on maximum or automatic.
• Locate the low-pressure service port of your vehicle. Pull back the plastic ring, connect the hose to the port, and release the ring. A clicking sound should confirm the connection.
• Turn the bottle upside down and slowly open the valve to allow the contents to enter the A/C system.
IMPORTANT: Continuously monitor the pressure gauge and stop the filling process once the correct pressure is reached.
• When the bottle is empty or the target pressure is reached, close the valve. Turn off the engine and disconnect the hose.
• Restart the vehicle and check the cooling performance of the A/C system. Wait 10 minutes and recheck the pressure.
Additional information
| Weight | 250 kg |
|---|---|
| Dimensions | 8 × 11 × 24 cm |
